Unsolved
This post is more than 5 years old
3 Posts
0
7165
January 26th, 2006 16:00
Cannot display HTTP. Have connectivity and can Ping. What am I forgetting?
Network = Charter to belkin wireless router to inspirion plus 9 other computers.
9 out of ten computers are working as advertised.
Inspirion gets connected, gets valid IP (from local router DHCP) for network.
Inspirion can ping
a well known web page, Tracert same, ping local router, and ping DNS root servers (4.2.2.x).
However, no HTTP will display in IE. It won't even show http configuration page from local router even though it can ping it. All other computers can display all http's.
I disabled WXP firewall and McAfee services. Properties for connections are all set to automatic. This problem exists for both the wireless connection and for the wired connection.
This is a new computer just out of the box.
Am I forgetting something obvious?
Message Edited by rc811002 on 01-26-2006 01:03 PM
No Events found!



LtLeary
241 Posts
0
January 26th, 2006 16:00
Well you've certainly taken care of most of the "usual suspects" so lets move on.
In IE go to tools, Internet Options, Connections, Lan Settings and uncheck all boxes (or if you are using a proxy, that it is set like all your other PCs.) I'm not sure if you have your Belkin as a proxy or just NAT....Does Mail (pop3 or IMAP) work? Can you telnet to your mail server on port 25
If that is done, and you still have issues, lets make sure that IE isn't set to work off-line by going to File and seeing if a check is next to "work offliine." If so, uncheck and see if that works for you.
Beyond these two issues, I'm afraid you've checked everything I would (even the privacy/parental control options on the router!)
LtLeary
241 Posts
0
January 26th, 2006 16:00
O
Message Edited by LtLeary on 01-26-2006 01:52 PM
rc811002
3 Posts
0
January 26th, 2006 17:00
LtLeary
241 Posts
0
January 26th, 2006 18:00
Message Edited by LtLeary on 01-26-2006 06:07 PM
rc811002
3 Posts
0
January 26th, 2006 22:00