Unsolved
This post is more than 5 years old
2 Posts
0
20295
February 22nd, 2010 20:00
Connecting Powerconnect 6024 & 2848 using SFP
Hi, I'm having problems to connect 2 switches (Powerconnect 6024 & 2848) using SFP, if I connect them using patch cords (3 mts) works perfectly but if I connect them with my new fiber (~~200mts) never get link or connection.
I already requested to the Fiber Provider a doble check to the installation, they reviewed the installation with a OMNISCANNER, having a good connection (less of 1% of lose), my transceivers are SX (both side) and where suggested by the same people of sales.
Someone could know what is happening with my connection, any suggest?
No Events found!
Yottabyte
139 Posts
0
February 22nd, 2010 20:00
Have you been here yet: http://support.dell.com/support/topics/global.aspx/support/product_support/product_support_central?c=us&cs=RC956921&l=en&s=biz
There are troubleshooting steps to walk you though isolating the problem. Either use your service code or select by model -> Servers and storage
AntonioHernande
2 Posts
0
March 8th, 2010 09:00
Seems the transceivers don't work with the current fiber installed, I requested to DELL a different model of transceivers and is on road, once that I test them I will let you know for your information.
Current fiber: 170mts Single mode.
Current transceivers: SFP 1000-SX, LC (only work with multimode).
New requested transceivers: SFP Optical Transceiver, 1000BASE-LX, LC