Unsolved
This post is more than 5 years old
1 Rookie
•
12 Posts
0
25763
November 27th, 2005 21:00
Dimension 2400 Resource CD
I have a Dimension 2400 but for some reason I lost my Resource CD. I looked at the download section for my computer but I saw a lot more than just one of each. Do I have to find the CD or will I find what I need it that area? What ones specificly do I need to download? (Im on a different computer.)
No Events found!


volcano11
2 Intern
•
28K Posts
0
November 27th, 2005 21:00
volcano11
2 Intern
•
28K Posts
0
November 27th, 2005 22:00
Unless you ordered something special as an extra add-on to your computer, which only you would know, the network adaper, video adapter, and sound card are all integrated.
Audio - http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R94481&SystemID=DIM_PNT_P4_CEL_2400&os=WW1&osl=en&deviceid=2430&devlib=0&typecnt=1&vercnt=4&formatcnt=1&fileid=122481
Ethenet Network adapter - http://support.dell.com/support/downloads/type.aspx?c=us&cs=19&l=en&s=dhs&SystemID=DIM_PNT_P4_CEL_2400&os=WW1&osl=en&deviceid=3597
Video - http://support.dell.com/support/downloads/type.aspx?c=us&cs=19&l=en&s=dhs&SystemID=DIM_PNT_P4_CEL_2400&os=WW1&osl=en&deviceid=3597
Did you check your original system configuration?
Steve
Mike1986
1 Rookie
•
12 Posts
0
November 27th, 2005 22:00
jmwills
2 Intern
•
12K Posts
0
November 28th, 2005 03:00
europa303
4.4K Posts
0
November 28th, 2005 13:00
jmwills
2 Intern
•
12K Posts
0
November 28th, 2005 14:00
Mike1986
1 Rookie
•
12 Posts
0
November 28th, 2005 19:00
volcano11
2 Intern
•
28K Posts
0
November 28th, 2005 20:00
Mike1986
1 Rookie
•
12 Posts
0
November 29th, 2005 02:00
Quantity Parts # Part Description
0 4X388 INSTRUCTION, PREP-MTL, DEVIATION, DIMENSION, INCREASE, NUMBER
1 K1136 PROCESSOR, 80531, 2.4G, 128K, 400, CELERON, DECISION ONE
1 7N242 KEYBOARD, 104, UNITED STATES, SILITEK, LOW COST, MIDNIGHT GRAY
1 W1668 KIT, MOUSE, PERSONAL SYSTEM 2, 2BTN, WHEEL, LOGITECH
1 U0970 DIGITAL VIDEO DISK DRIVE, 680M, 16X, I, 5.25" FORM FACTOR, HITACHI LG DATA STORAGE, MIDNIGHT GRAY
1 J1894 KIT, SOFTWARE, WP-PRDCT-STE11, ENGLAND/ENGLISH
1 N2999 KIT, SOFTWARE, MNY-2K4, STANDARD, ORIGINAL EQUIPMENT MFGR., ENGLAND/ENGLISH
1 P2643 KIT, SOFTWARE, MSENC-2K4, ORIGINAL EQUIPMENT MFGR., ENGLAND/ENGLISH
1 R2553 KIT, SOFTWARE, OVERPACK, WXPHSP1A, COMPACT DISKETTE W/DOCUMENTATION, ENGLAND/ENGLISH
1 G2876 KIT, DOCUMENTATON ON FLOPPY DISK, SOFTWARE, CYBERLINK, 4.14, DIMENSION
1 N0804 HARD DRIVE, 80GB, I, 7.2K, 80G/P, SEAGATE-ALPINE
1 F0598 DUAL IN-LINE MEMORY MODULE, 256, 333M, 32X64, 8K, 184
Thats all that was listed when I searched Original System Configuration.volcano11
2 Intern
•
28K Posts
0
November 29th, 2005 03:00
They sure don't tell you much in England, do they. Which drivers do you still need? If you go into Device Manager, which devices are still shown as problem devices after you have installed the drivers I already suggested?
Steve
Mike1986
1 Rookie
•
12 Posts
0
November 29th, 2005 03:00
volcano11
2 Intern
•
28K Posts
0
November 29th, 2005 03:00
Yes, this should install the chipset drivers. Once they are installed, report the other problem devices.
Steve
Mike1986
1 Rookie
•
12 Posts
0
November 29th, 2005 03:00
volcano11
2 Intern
•
28K Posts
0
November 29th, 2005 03:00
If the SM Bus controller is listed as a problem device, it means that you haven't installed the chipset drivers. You never said, but it looks like you have recently reinstalled Windows (this would have been helpful information when you first posted) and did not install the chipset drivers as the first drivers installed after reinstalling Windows. Once the chipset drivers are installed, there will likely be many more devices listed in Device Manager as problem devices. Tell us what those are once the chipset drivers are installed.
Steve
volcano11
2 Intern
•
28K Posts
0
November 29th, 2005 04:00
Try the following:
http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R86399&SystemID=DIM_PNT_P4_CEL_2400&os=WW1&osl=en&deviceid=2441&devlib=0&typecnt=1&vercnt=3&formatcnt=1&fileid=113231
Steve