Unsolved
This post is more than 5 years old
1 Message
0
59228
October 2nd, 2010 07:00
Intel Centrino Advanced N 6200 AGN
Anyone else having problems with this adapter. I am constantly having to run the troubleshooter in windows 7 to reset the adapter. I have four computers here and this is the only one that has a problem. Using the Studio 1749. I did upgrade the drivers for the adapter.
Jim
No Events found!


JMLloyd
6 Posts
0
March 26th, 2011 12:00
Exact same problem with a Studio 1569 that has the same network adapter - no solution yet.
TorreTechnologi
2 Posts
0
June 1st, 2011 21:00
I am having the same issue with my studio 1749, ive reinstalled all drivers and even reinstalled windows 7 and it still will not connect to any wireless networks (secured or unsecured) the laptop is only 15months old.....and it just so happens it came off its warranty, lol
TorreTechnologi
2 Posts
0
June 2nd, 2011 17:00
So today at class I removed the wireless card from the laptop and inserted another card which I knew was working (it was from another laptop) and the wireless began working fine!!!! So I ordered a new card from tiger direct for $63 shipped!!!! the part number is yyi1-cg6024.......hope this helps you guys out!!
PudgyOne
11 Legend
•
30.3K Posts
•
106.6K Points
0
June 3rd, 2011 02:00
I have Windows 7 Home Premium 64-bit and was having problems with the Microsoft Virtual WiFi Miniport Adapter and Microsoft Virtual WiFi Miniport Adapter #2 causing the processor to spike. These are related to My WiFi Technology and the Intel(R) Centrino(R) Advanced-N 6200 AGN adapter
I went to...
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19514&lang=eng&OSVersion=Windows%207%2C%2064-bit*&DownloadType=Software%20Applications
Downloaded the ICS_s64.exe
Make a system restore point.
I enabled the Microsoft Virtual WiFi Miniport Adapter and Microsoft Virtual WiFi Miniport Adapter #2
I went to start, control panel, programs and features. I uninstall Inter ProSet Wireless and I also think I uninstall the Intel Wireless Display.
Restarted the computer.
Went to start, control panel, device manager, network. I noticed that the 6200 was still there. I right clicked on it, then left clicked uninstall. It asks you if you want to remove and associated software with it. I clicked yes. When it was done, I restarted the computer.
I then double clicked on ICS_s64.exe, choose custon to make sure everything was going to be installed. I then installed and restarted one last time. I then connected and everything seems to be working fine, no processor spikes and I even have the Microsoft Virtual WiFi Miniport Adapter and Microsoft Virtual WiFi Miniport Adapter #3(now #3) enabled.
Rick