Ipconfig will not release ip address for new connection. What do I do? Ipconfig will not renew either. Im stumped. I am stuck with a bad 169.xxx.xx address, and I cant reset to 000.000.00 I have reformatted the drive when problem arrose. I have sence reformatted twice..with no luck in changing the address....Each time i finish reformatting and get everything to norm..i check..and still the same address.
What kind of internet connection do you have (cable/dsl/dialup)? Which model computer do you have? After reinstalling Windows did you install the chipset drivers before attempting to install any other devices? Have you messed with the default settings in the TCP/IP properties?
More than likely the Chipset drivers were not installed, so if you would check the System Applet in the Control Panel and go to the Hardware Tab then to the Device manager to see what other devices did not get installed either.
I did run an experiment. I installed another ethernet card. And was able to get the internet working just fine. But I cant leave it in there, it belongs to another computer. So I took it back out and went back with the intergraded ethernet, and same problem.
And no..I rechecked the TCP/IP to make sure everything was default.
I have reinstalled everything correctly. This is not my first reformat. There is nothing in the device manager with errors or question marks. I am hooked through DSL modem with ethernet. Demension 2400. So the ethernet is entergraded. Driver is fine and I did uninstall and reinstall the driver for ethernet. I didnt know chipset had anything to do with ethernet driver or ip address. I have reformatted hundreds of computers and I have never ran accross this problem..Thanks for the help.
I agree..But something tells me its a software issue and not a hardware issue, I was just asking incase there was something i didnt think of. Ill end up just buying a new Ethernet card. But , there should be a fix somewhere, I love problems I cant handle. I might even leave it broken until I pin point exactly what the problem is. Looks like this problem will be my hobby for a while.
New developement. With a PCI ethernet installed I can release the ip address. But when renew it, it goes back to the same address and no internet connection is made. I unplug the modem, turn the pc off, plug in the modem and restart the pc. Still no connection. When I renew address, 2 computers show up in my start box in the bottom right hand corner...they soon dissapeer, but still no connection and when I check the address, it is identicle to the one before. I did a release and a flushdns, still nothing. Another computer hooked to the same modem , connects right away when I rest the modem.
Zapperlink
20 Posts
526
0
Posted August 22nd, 2006 22:00