Unsolved
This post is more than 5 years old
27 Posts
0
97782
December 30th, 2003 16:00
"Network cable unplugged" status when known good LAN cable is plugged in
System:
Inspiron 8500, 2.2GHz Pentium 4, 1Gb RAM, 60Gb HD, >40Gb free
Windows XP Home
Starting yesterday, I can' t connect to the network where I work.
When I bring up "Network Connections", the Local Area Connection (Broadcom 440x 10/100 Integrated Controller" shows a red X, with the status "Network cable unplugged". This is even with a known good network cable plugged into the back of my 8500.
I've checked Device Manager, and there are no warning or error messages associated with the Broadcom device. Device status is listed as "This device is working properly".
In possibly related news, starting a few days ago, something in my 8500 apparently always "thinks" that it is docked, even when it isn't. This causes an error during the boot process, unless I have the AC power adaptor plugged in to the back. Note that the BIOS correctly says the system is undocked when it is undocked and docked when it is docked. For more details, see my comments in the thread "Inspiron 8500 Not Powering on When Un-Docked", http://forums.us.dell.com/supportforums/board/message?board.id=insp_apr&message.id=4914
I should note that yesterday was the first time I tried connecting to a LAN network after I started seeing the docking/boot problems.
Any ideas about the problem? Do I have a bad or failing motherboard?
My apologies if this topic has come up before; I check the last few weeks of threads in this area, but didn't see anything that looked related.


jpm121
2 Intern
•
133 Posts
0
December 31st, 2003 17:00
co_bass
27 Posts
0
December 31st, 2003 18:00
Hi jpm121 - Thanks for the response. I was beginning to wonder if anyone was out there.
To answer your question, the other end of the LAN cable was plugged into a junction box.
I'm sure the LAN cable was good. It was plugged into a desktop PC. (To be specific, the one I'm typing on right now, with same LAN cable I used.) Before trying the LAN cable on my Inspiron, I logged on to the desktop and surfed around awhile, to make sure I connectivity with the outside world. No problem with the desktop PC, "Network cable is unplugged" with my Inspiron.
FWIW, the LAN cable is labeled (from the manufacturer?)
D8CM 7FT 2.1M 36/02N
jpm121
2 Intern
•
133 Posts
0
December 31st, 2003 19:00
Okay, I had to ask to be sure. I've had users plug into a random wall jack somewhere in the office but not realize that at the other end the patch panel wasn't plugged into anything...
Sounds like a standard Cat5/5e patch cable. If your other PC was able to surf, it's clearly a laptop problem.
Joris67
2 Posts
0
January 2nd, 2004 14:00
Since yesterday, I'm facing almost the same problem with my inspiron 5100. When i plug in a good network cable, the orange light is on but the green (data exchange or whatever) is out. Sometimes, for one or two minutes i'm able to connect to the internet, so i think this had to do with hardware or something.....
The cable is OK (tried other laptops), so the strange thing is that sometimes i do have a connection for a short periode of time. What can i do??
jmwills
2 Intern
•
12K Posts
0
January 2nd, 2004 21:00
co_bass
27 Posts
0
January 2nd, 2004 21:00
I'll report back next week and let people know if my problem is fixed.
Wish me luck!
Joris67
2 Posts
0
January 3rd, 2004 04:00
How do i solve my problem (good cable plugged in (both sides))? Is there any chance it has something to do with software? Orange light burning, but the green light is off. What do these two lights mean? And do these problems occur ofter with inspiron 5100?
Thanks for all help......
co_bass
27 Posts
0
January 3rd, 2004 13:00
Other LED off - No network activity
From your Desktop, click the "Dell Support" icon, or, from the Start Menu, select
Start -> All Programs -> Dell Applications -> Support -> Support
Once you have the Dell Support program up and running, select
Reference -> User's Guide -> Device Guides (left side menu) -> Broadcom Ethernet User Guide -> Contents (right side menu) -> Introduction, then scroll to the bottom.
brendanp
8 Posts
0
January 3rd, 2004 22:00
I have a similar problem with my i8500. The solution I have found is to go into "network connections", disable the "network bridge" and re-enable it. After about 20sec the connection to your network should be restored.
I dont know why this works but it does for me. However, I dont have a docking station so am not affected by the other problem you mentioned.
Brendan
co_bass
27 Posts
0
January 4th, 2004 15:00
brendanp - Thanks for the suggestion.
However, I don't think it applies to me. When I go into "Network Connections" (Start -> Control Panel -> Network and Internet Connections -> Network Connections), I don't see any section labeled "Network Bridge".
I assume that this means that I currently don't have a network bridge enabled. (I don't remember ever enabling one.)
If I'm wrong about how to check for the existance of a network bridge, please let me know.
brendanp
8 Posts
0
January 4th, 2004 17:00
Windows created the network bridge all by itself when I ran the "Set up a home or small office network" wizard. My network currently consists of 3 pcs, one 10/100 hub, with one pc sharing its internet connection with the other two.
Brendan
johnallg
2 Intern
•
7.3K Posts
0
January 4th, 2004 18:00
oneguytrading
3 Posts
0
January 17th, 2004 15:00
co_bass
27 Posts
0
January 17th, 2004 20:00
In addition to the LAN problems I mentioned at the start of the thread, I was also having problems booting. I couldn't boot on battery power alone, I had to either be docked to my APR, or at least have the AC adaptor attached. (The subject of another thread - "Inspiron 8500 Not Powering on When Un-docked".
To make a long story short, I called Dell Tech Support and convinced them to replace my motherboard.
Once the new motherboard was installed, both problems (can't connect to LAN and can't boot on batter power alone) went away. (Now if I could just get rid of the problems I'm having printing to my HP all-in-one USB printer when docked. Dell Support wants me to buy a powered USB hub to solve my problems.)
Thanks for the various comments on this thread; they were all useful in one way or another.
Sorry for the late notice - my bad.
co_bass
27 Posts
0
January 17th, 2004 20:00
But...
What kind of self-respecting virus would, as one of its primary actions, shut off access to the Internet, even by accident or stupid virus code writing by its creator?
I mean, once it infect (say) your PC, how does it get to another PC? By floppy? IR link? Bluetooth?
Heck, if it kills Internet access on infected computers, how did it get to *YOUR* computer in the first place?