Unsolved
This post is more than 5 years old
26 Posts
0
6475
August 5th, 2005 17:00
problem lan connetction with 2 dell dimension 5000/4550
hi i am sergio
i have problem with 2 pc with create lan connection with 2 dell dimension 5000(home) 4550(xp pro)
i have router prestige 600 serie
before buyed the lats one (dell 5000) the old pc (no brand) work with dell 4550
after no
what happened?
i have 4 mega adsl flat connection telecom italia,what wrong i doing?
i put 192.168.0.1 /// 192.168.0.2 (second pc) but if connetct this lan ..the explore no open and give me error(isolated from internet)
can someone help me pls?
thanks for time and replay
sergio setfano
No Events found!
jmwills
2 Intern
•
12K Posts
0
August 6th, 2005 16:00
First of all, where is Italy are you getting a 4 meg service from Telecom Italia? They keep promising it here in Vicneza but no luck yet.
Are you giving both PC's static addresses? If so, set them for DHCP instead of static and let the router issue the addressing. Also, are you using a router with Ethernet ports and if so, which model?
sergiostefano
26 Posts
0
August 6th, 2005 17:00
well the company is telecom italia
the link official is in english
http://www.telecomitalia.it/cgi-bin/tiportale/TIPortale/ep/start.do?LANG=EN
the service called alice www.alice.it
the dns is dynamci because is home no business
the zyxle router 4+1 is model prestige 600 series
can u help me pls?
its possibile tha because have 2 different version of xp?
home and pro and so no connect?
where i see in setting?
thanks in advance for time and patience
regards
sergio porcarelli
jmwills
2 Intern
•
12K Posts
0
August 6th, 2005 18:00
The two versions do not matter. First, power down everything and wait a few minutes. Reconnect and power up all the deives in this order, modem, router, and wait a couple between these two. now power up the pC's and checl the device manager to make sure you have no conflcis as would be evident by a yellow exclamation mark.
From each machines see if you can ping the router by going to a command prompt and type;
ping 192.168.0.1 and post back
By the way, you can have internal static addresses since you are behind a router.
sergiostefano
26 Posts
0
August 6th, 2005 19:00
thanks
i follow the automatic step for xp version for create an little lan domestic
if i create 2 lan connect beetweeen the pc and put 192.168.0. 1 and second 192.168.0.2 the pc are connect but disconnected formn internete ( i see this because if open explore open withe page error)
i put subnet masj 255.255.255 0
thanks again
sergio
jmwills
2 Intern
•
12K Posts
0
August 7th, 2005 04:00
NO, you are giving the PC's static addresses, do not do that. The router address will be 192.168.0.1 and the PC's will automatically get addresses from the router so to configure TCP/IP you mark the setting to "Receive An Address Automatically". There should be no numeric values on that page whatsoever.
If you go to a command command prompt and type "ipconfig" with the quotes you should see an address of something like:
IP Address: 192.168.0.100
Subnet: 255.255.255.0
default Gateway: 192.168.0.1
Message Edited by jmwills on 08-07-2005 07:02 AM