Unsolved

This post is more than 5 years old

1 Rookie

 • 

8 Posts

5356

April 23rd, 2006 13:00

USB ADAPTER FAILING

I have a D-link Usb adapter for my 4700C. The wireless internet use to work for the first 4 months, now it either doesn't recongnize the network, or the device doesn't work. I updated all the drivers for the router and the adapter. The person from D-link thinks it the BIOS, but I not sure about it.

2 Intern

 • 

28K Posts

April 23rd, 2006 15:00

To help troubleshoot this problem, go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message.

Steve

1 Rookie

 • 

8 Posts

April 23rd, 2006 17:00

But, wont that give away my ip address, isn't that bad.

2 Intern

 • 

28K Posts

April 23rd, 2006 17:00

Anyone can read you IP address anyway.  If they couldn't there would be no way for the internet to work, since everything you request from the internet has to get back to your IP address.  If you are that fearful, leave out the last two octets of the IP address.

Steve

1 Rookie

 • 

8 Posts

April 23rd, 2006 18:00

Well, that a problem, because the person from D-link told me update the BIOS so, I did the thing is now the computer tells me the processor is incompatible, so  I have to reset.Anyone know how to do that.
No Events found!

Top