Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

Heml0ck

7 Posts

4018

February 15th, 2005 19:00

Where is my Dimension 4600 Ethernet Driver

Have a standard dimension 4600. It appears my ethernet driver is not installed. I have loaded the resource disk and installed the 10/100 software. No effect. I persumem it has to be this one as the other two are wirelss drivers.
 
I have uninstalled the piece of hardware and rebooted. After reboot the ethernet is detected and the driver searched for. No good either. I really just nned someone to point to the driver and name it and tell me how to install it. I have installed a couple of things so far but i still get the yellow exclamation mark beside the ethernet on the device manager.
 
PLEASE HELP. GOING INSANE

volcano11

2 Intern

 • 

28K Posts

February 15th, 2005 20:00

If you go into Device Manager, are there any other diveces listed as problem devices?  If so, which ones?  Did you recently reinstall Windows?  If so, did you install the chipset drivers as the first set of drivers installed after the reinstallation of Windows?  The chipset drivers are necessary before any device integrated on the motherboard can be properly installed.
 
Chipset drivers can be downloaded from:
 
 
Ethernet controller drivers from:
 
 
Steve
 
 

Heml0ck

7 Posts

February 15th, 2005 21:00

all other devices are ok. ONly the ethernet controller showing the yellow symbol under the other devices. installed the driver u supplied. seems to have had no effect.

volcano11

2 Intern

 • 

28K Posts

February 16th, 2005 00:00

Have you tried uninstalling the network adapter, rebooting, then reinstalling the network adapter?  Have you tried running the diagnostics on the network adapter?
 
Steve

Was this post helpful?

View All

No Events found!

Top