Unsolved
1 Rookie
•
6 Posts
0
396
September 20th, 2024 18:06
Problem with clean install Windows 11 on OptiPlex Small Form Factor 7010
I have a problem with a clean new installation of Windows 11. Namely, when the disk is searched during installation, I get a message with the error 0x80070001 0x4002f. Where is the problem? I tried to disable Secure Boot, changed FastBoot to Auto and I can't install. The processor is 13th generation, the disk is NVMe SK-Hynix-BC901
JOcean
9 Legend
•
12.6K Posts
0
September 20th, 2024 19:07
This page at PartitionWizard may help. It is possible that the SSD you are trying to install Windows on is set as a dynamic disk which Windows 11 will not allow.
Krzysztof80
1 Rookie
•
6 Posts
0
September 21st, 2024 05:01
But Dell somehow installed the system there.
Krzysztof80
1 Rookie
•
6 Posts
0
September 21st, 2024 07:15
No disk is Basic......
bradthetechnut
7 Technologist
•
9.2K Posts
0
September 22nd, 2024 01:01
You should be able to leave Secure Boot on. May need to try a different SSD/HDD, preferably SSD.
By any chance did you try Data Wipe in BIOS first? Data Wipe Google
Be sure to boot with flash drive with Win11 loaded from the Microsoft site.
(edited)
Krzysztof80
1 Rookie
•
6 Posts
0
September 22nd, 2024 05:13
I'll try tomorrow, although this option is a last resort for me.
(edited)
Krzysztof80
1 Rookie
•
6 Posts
1
September 22nd, 2024 17:01
Problem solved. Ventoy must have configuration MBR/NTFS. Before I have GPT/exFat
bradthetechnut
7 Technologist
•
9.2K Posts
0
September 23rd, 2024 03:41
Glad you figured it out. :)