Do you have the Samsung Magician software installed and if so is TRIM enabled? If you don't have that software then this web page may help with enabling TRIM. This page may also help.
Samsung Magician Software installed is version 7.0.1. Very few of the software features are supported by the PM991 drive. Could not find a setting to enable trim.
Used the Power Shell terminal for command line actions.
Initial query indicated trim was enabled. I toggled the feature to off and then to on. The trim feature is still not available in the Tools section. Did a restart and the results are the same.
I do note the Tools section reports the last analyzed or optimized date coincides with the latest windows update.
DELL-Chris M
Community Manager
•
56.9K Posts
0
August 23rd, 2022 05:00
Update = After verifying ownership and completing troubleshooting, a DELL agent setup service.
JOcean
9 Legend
•
12.6K Posts
0
April 29th, 2022 05:00
Do you have the Samsung Magician software installed and if so is TRIM enabled? If you don't have that software then this web page may help with enabling TRIM. This page may also help.
kitsap
1 Rookie
•
8 Posts
0
April 29th, 2022 09:00
Thank you for the reply.
Samsung Magician Software installed is version 7.0.1. Very few of the software features are supported by the PM991 drive. Could not find a setting to enable trim.
Used the Power Shell terminal for command line actions.
Initial query indicated trim was enabled. I toggled the feature to off and then to on. The trim feature is still not available in the Tools section. Did a restart and the results are the same.
I do note the Tools section reports the last analyzed or optimized date coincides with the latest windows update.
I did not install the EaseUS software.
kitsap
1 Rookie
•
8 Posts
0
April 29th, 2022 09:00
I tried a manual retrim from the power shell command line. Results shown below.