1 Rookie

 • 

3 Posts

726

June 3rd, 2024 01:18

Two 4k monitors on OptiPlex Micro 7010

Hi

I have two  Dell S2721QS monitors on UHD770 with OptiPlex Micro7010.

One monitor is connected with displayport which I can get 4k resolution but the hdmi gives me maximum 1920x1080.

How can I get 4k on both monitors?

1 Rookie

 • 

3 Posts

June 6th, 2024 23:18

Hi the problem is solved by having MST displayport splitter Hub. I posted the link before. You need something like that. I bought in Australia.

7 Technologist

 • 

9.2K Posts

June 3rd, 2024 02:14

May need to have both monitors connected DP.  Optional 7010 micro DP port eBay

9 Legend

 • 

15.2K Posts

June 3rd, 2024 03:16

Dell’s hdmi 1.4b port (1920x1200 @60hz) is always of lower spec compared to DP.  Do not expect 4k out of Dell hdmi.  Unfortunately your S2721QS has only one DP so you cannot daisy chain them. You have micro 7010, not micro plus 7010.  If it were micro plus 7010 it has 3 DP at rear.

https://www.delltechnologies.com/asset/en-us/products/desktops-and-all-in-ones/technical-support/optiplex-micro-spec-sheet.pdf

(edited)

1 Rookie

 • 

3 Posts

June 3rd, 2024 05:22

@redxps630​ 

Does this help?

2-Port 8K DisplayPort 1.4 MST Splitter Hub (Dual 4K/60Hz)

https://www.cablechick.com.au/cables/2-port-8k-displayport-14-mst-splitter-hub-dual-4k60hz.html?gad_source=1&gclid=Cj0KCQjwsPCyBhD4ARIsAPaaRf18rTPRTf3N7exXsDs_hiY66Q-oop-GOac_D62khfquxShm_DBIoEEaAo45EALw_wcB

9 Legend

 • 

15.2K Posts

June 3rd, 2024 13:14

It might but is too expensive imo.  And we do not know the product review.

an optional DP port is less expensive.

DP/N 1DW11

this is from MFF 7010 part list

CRD, PORT, DP, D12

Optional DisplayPort
1DW11

This verifies brad’s eBay link.

now if you were located in Au, contact Dell directly using P/N above for stock n pricing. eBay shipping to Au too from abroad.

(edited)

7 Technologist

 • 

9.2K Posts

June 7th, 2024 00:50

Those 8k DP splitter hubs run in the $40's here in the U.S.

No Events found!

Top