Unsolved

This post is more than 5 years old

2 Posts

5558

August 24th, 2019 16:00

Upgrading an Optiplex 3010 Mini Tower

I plan on getting an Optiplex 3010 MT sometime in the near future. I am on a very tight budget, ~$400 or less. I want to buy the Optiplex along with a PNY NVIDIA GeForce GTX 1050 Ti 4GB Single fan graphics card, and a new cx550 psu. I am pretty sure that the parts are compatible, but I am concerned about the size of the case. Will the case be big enough to add a 1050 Ti SINGLE Fan and replace the psu?

11 Legend

 • 

12.6K Posts

 • 

69.5K Points

August 25th, 2019 14:00

Have a look at the posts in the following link.

https://steamcommunity.com/discussions/forum/11/1621726179570890900/

11 Legend

 • 

47K Posts

August 25th, 2019 15:00

2 Posts

August 25th, 2019 17:00

This doesn't answer my question really. Someone posted a link in the thread which is this https://i.dell.com/images/global/products/optix/optix-highlights/optiplex-desktop-3010-overview3.jpg  I plan on getting the computer on the far right in that picture. So would a single fan 1050ti like this https://www.amazon.com/gp/product/B01MCX07NW/ref=ask_ql_qh_dp_hza fit in the computer? and what PSU would you recommend for it? I think that the cx550 would be enough for it, but I don't know if it will physically fit inside of the computer. I've tried to do research and I haven't found anything about it. If I can confirm that the two parts will actually fit into the computer, I think things should work out well.

11 Legend

 • 

47K Posts

August 28th, 2019 06:00

CX550 is not working due to insufficient power on specific rails.

This is not a single spec of Watts and a single rail of 12v.

142 to 150W combined power on the 3.3v/5v rails is REQUIRED for 75W or greater video card.  Note 5v 25A on dell and 5v 20A on CX550

3.3v/5v  142W bare minimum3.3v/5v 142W bare minimum

You cannot have max power on each rail for all the rails listed. 

Short cards are required to physically fit into the case.

BARE Minimum recommended replacement for Mini Tower is EVGA 700BR.

B2 BQ W1 N1 700W models from same vendor DO NOT WORK because of the insufficient combined power on the 3.3v/5v rails.

https://www.evga.com/products/product.aspx?pn=100-BR-0700-K1

https://www.bestbuy.com/site/evga-700w-atx12v-eps12v-80-plus-bronze-power-supply-dc-dc-technology-black/6346160.p?skuId=6346160

Choosing a power supply based on a single spec of watts does not go well.

Chossing a power supply based on price rather than spec does not go well.

120W combined is insufficient.120W combined is insufficient.

4 Apprentice

 • 

2.5K Posts

August 28th, 2019 07:00

get the 3020,  it runs even  200watt cards, proof here

for sure buy MT, ok, full sized tower is MT, nothing  less, for max upgrade paths, ok?

3020 has SATA III and USB 3

why go  less?

MY PC was a whooping $50 , sold as NO HDD. why spend more?  tell me.? once in had, upgrade all you want./

best are like that, "3020  NO HDD", then buy $20 SSD for $20

and is UEFI class 2.7 (a very good max level and no UEFI pain as seen on SOME newer PC)

and see how this page shows even 200 watt GPU runs perfectly.  (all comments,  based on cheap , my T3610 is better)

http://pcdied.com/intel-magic/Dell/3020/3020.html

 

the GTX1050 is super easy to run it is 75watts or less. childs play really. ( I can run AAA games 2019 no prob)

I even got a 200watt gpu running in a old 790 dell.  R9 and GTX260  and more, I have a box of power hog GPU cards I use to test PCs. (running 3d passmark and furmark)

if going over, 75watts use a 700watt PSU, ask for examples,  the PSU on mine is only a 12vdc PCU

there is no 5v or 3.3v rail in my 3020  PSU casing at tall.

the 3010 is more tricking with , high power needs on the 3/5vdc PSU.

the 3010 needs 10amps 3.3v min. and 13amps on 5v rails. PSU minimum and is  not hard to reach, at all.

300w stock Psu does that.

Unit 0D3PMV D3PMV

forget the 3010 go 3020 , really!!!!!

 

No Events found!

Top