Unsolved
This post is more than 5 years old
1 Message
0
923
January 7th, 2019 03:00
Dell poweredge T130 server windows 2012 R2 RAID not support
Dear Team, Kindly help me to resolve RAID 1 issue with Dell Poweredge T130 server, I have 2008 server with Hyper V image, that is successfully installed RAID 1 but based on my new staging key for windows 2012 R2, RIAD is not success its make an error without RAID its working perfectly. I tried to inject different drivers even its failed. If anybody know this issue and solution please share. Regards, Martin.
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
January 7th, 2019 09:00
If you are using the S130, don't. Disable RAID in the BIOS and use the drives in AHCI/SATA mode. The S130 is garbage.
Daniel My
12 Elder
•
6.2K Posts
0
January 7th, 2019 09:00
Hello
I don't see the controller you are using mentioned in the post. If you need assistance with a controller issue then you should provide that information.
Most of our controllers will work with Windows native SAS drivers. I suspect you are using the S-130 controller since that is the only one I can think of that will not work with native drivers. If you are using the S130 you will need to slipstream those drivers into your image. The drivers can be found on the system support page.
http://www.dell.com/support/
http://www.dell.com/storagecontrollermanuals/
Thanks