This post is more than 5 years old
3 Posts
0
47026
October 20th, 2015 14:00
Dell PowerEdge T610 (Memory Upgrade)
I just bought Dell 16 GB Certified Replacement Memory Module for Select Dell Systems - 2Rx4 RDIMM 1333MHz LV.
Currently, I have 8GB of RAM (1GB on each slots). After I installed this new memory and reboot the server, it shows invalid memory configuration. So, I changed the memory setting in the BIOS from "Advanced ECC" to "Optimize Memory". But, It's still only detecting my current speed of memory which is 8GB. Is there anything wrong with the memory configuration? I've tried to re-seated the new RAM.
Please help. Thanks.
No Events found!
hendyamp
3 Posts
0
October 20th, 2015 17:00
Thank you for your reply.
My current memory slots are: (memory setting: Advanced ECC)
1GB on each slots of A2, A5, A3, A6 and B2, B5, B3, B6.
If I purchase another one which slots I should put in? 16GB in A4 and 16GB in B4? and what memory setting I should use, Advanced ECC or Memory Optimize?
Thank you for your help.
DaveForgione
1 Message
0
September 30th, 2019 10:00
So if I have 4 16s do enter them all in CH2. a1 and b1 and then a4 and b4 or should the second set of 16 go into CH1 a2 and b2.