This post is more than 5 years old

2 Posts

111857

November 9th, 2012 05:00

Dell r310 Memory upgrade

Currently has Samsung 4 x2GB Registered in slots 1,2,3,4 and working fine. I can get the information further. This RAM was stock from Dell running at 1.35V.

Trying to upgrade to Kingston KVR13LR9D4k4/32 running  Hynik H5TC2G43CFR-H9A chips on a Xeon X3430 at 1.35V.

Any idea why these aren't working?

990 Posts

November 9th, 2012 06:00

Good morning.

According to the specifications on the Kingston memory, it is dual rank; its listed as 2Rx4;   this server only supports 8gb quad ranked RDIMM's.  Here is the Dell part number and specification:

K075P 8GB RDIMM 1066 (QuadRank) DIMM,8G,1066,4RX8X72,8,240,REG

Here is the link for the technical guide for memory information, listed under 8.1:

http://www.dell.com/downloads/global/products/pedge/en/poweredge_r310_techguide_final1.pdf

Regards,

990 Posts

November 9th, 2012 07:00

I located the memory at impactcomputers.com :  www.impactcomputers.com/k075p.html

Hope this helps,

Have a great day.

Regards,

2 Posts

November 9th, 2012 07:00

Hi Geoff,

I checked around online and have been unable to find this memory module available really anywhere. Any chance Dell still sells these or you know where I can retrieve 4 sticks or a comparable type of memory? Looked around and finding this exact configuration of memory is extremely difficult.

1 Message

May 16th, 2014 06:00

0 events found

No Events found!

Top