Unsolved
This post is more than 5 years old
1 Rookie
•
2 Posts
0
1352
June 21st, 2018 17:00
I can't boot r710
Hi , I can't boot my r710 server ,and the error logs are below ,can someone help me ?
System Boot System Board PFault Fail Safe: Voltage sensor for System Board, state asserted was asserted
System Boot System Board 8.0 V PG: Voltage sensor for System Board, state asserted was asserted
No Events found!
DELL-Chris H
7 Practitioner
•
9.7K Posts
•
48K Points
0
June 22nd, 2018 04:00
JohnYatatat,
The first thing you can try is to clear the SEL and power down, pull the cord, hold the power button in for 20 seconds to clear all power off the board. The open the cover and remove everything from the server but the following;
System board
Risers
Processor (CPU1) with Heatsink
Power Supply (test each individually)
One stick of memory in slot A1
Control Panel with cable
Then power it back up. If you get the same error, we may need to look at replacing the motherboard.
Let me know what you see.
.