Unsolved
This post is more than 5 years old
1 Rookie
•
12 Posts
0
7824
October 19th, 2012 09:00
M600 Degraded Backplane
Hi,
After replacing a failed drive in a M600 blade i have a "degraded backplane" status now. backplane firmware is 1.06
I have cleared the logs, run DSET utlity and this shows now errors on backplane. CMC shows NO errors
I have not replaced the backplane yet, but i dont think the backplane is faulty.
Any ideas
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
October 19th, 2012 13:00
Hello commsman
If the error does not show in a DSET then it is likely not an active error. Have you restarted the server since replacing the HDD? You can try restarting the OMSA services to get it to update(about 4 that all start with DSM), but it may require a server restart to sync up correctly.
I think it is just a reporting issue, but if the restart of the services or the server does not resolve the problem let us know.
Thanks