Unsolved
This post is more than 5 years old
1 Message
0
2859
March 14th, 2012 04:00
m610 blade server wake on lan setting (WOl)
Dear All,
Any body knows how can we configure the wake on lan setting (WOl) on m610 blade server????????
No Events found!
Unsolved
This post is more than 5 years old
1 Message
0
2859
March 14th, 2012 04:00
Dear All,
Any body knows how can we configure the wake on lan setting (WOl) on m610 blade server????????
Top
DELL-Chris H
7 Practitioner
•
9.7K Posts
•
48K Points
0
March 14th, 2012 08:00
Ashraf,
You will need to do the following:
1- Restart the computer.
2- Press within four seconds after the prompt appears.
NOTE:
The message prompting to press is displayed once for each Broadcom adapter you have. The messages are displayed in the same order as the assigned adapter device number.
3- Use the up arrow and down arrow keys to move to up and down through the MBA Configuration Menu. Use the right arrow or left arrow key to change settings of the selected option.
4- Scroll to Pre-Boot Wake On LAN and set as enabled.
5- Press to save your settings. Hit Escape to exit.
Let me know how it goes.