Unsolved
This post is more than 5 years old
1 Message
0
75063
January 8th, 2004 21:00
PowerEdge 1400SC - System Specs
Dell Server : PowerEdge 1400SC
Service Tag : FR4QL01
Hello there,
Is there any way I can check to see what the absolute maximums are for my server? Namely, what is the fastest processor it can handle, what the maximum amount of RAM it can handle and what type it needs, if the server has IDE slots, SCSI slots and on down the line. I looked at the 'Origional Configuration' option in the support area and the data that I received was rather cryptic.
Thank you for your time!
- Dave Smith
Service Tag : FR4QL01
Hello there,
Is there any way I can check to see what the absolute maximums are for my server? Namely, what is the fastest processor it can handle, what the maximum amount of RAM it can handle and what type it needs, if the server has IDE slots, SCSI slots and on down the line. I looked at the 'Origional Configuration' option in the support area and the data that I received was rather cryptic.
Thank you for your time!
- Dave Smith
0 events found
No Events found!
DELL-Mark A
2 Intern
•
2.5K Posts
0
January 8th, 2004 22:00
Hi Dave,
The maximum processor for this system is 1.0GHz:
311-1273 1.0GHZ/256K, PE1400,CUST
Which includes these parts:
11GEF Voltage Regulator Module (VRM)
2C970 Heatsink
4C788 Heatsink Clip
3D581 Processor (This is an Intel RB80526PZ001253 - SL52R)
Maximum Ram is 2Gb, PC133, Registered ECC
This system does have IDE support, but only for the CDrom.
This system has Adaptec AIC-7899 (2 channel) Scsi support on the motherboard.
6 PCI slots (4 x 64-bit/33Mhz; 2 x 32-bit/33Mhz) No ISA slot
1 embedded Intel Pro 100+ Network Interface Card
Thanks for using the Dell Community Forums!