PowerEdge 2400 Cooling Fan

---

@TrafficPD wrote:

I need a replacement fan and I can't find the specs I need anywhere...anyone know?

---

I dont have a 2400 but it appears to me that the 2300 and the 2400 use
the same size and design for the case fan.  It appears that way to me but since I dont have on I have no way of knowing.  However since they are not really expensive Its probably worth trying.

http://www.allelectronics.com/cgi-bin/category.cgi?item=CF-153

@JMC# 1225-12HBA. 120 mm (4.72") square x 25 mm (1") wide cooling fan. Dual ball bearing fan provides reliable output of 88 CFM @ 2600 RPM. 12 Vdc @ 0.6 Amps. 45 Dba max @ 1M. Designed for 50,000 hours @ 25 deg. C. Thermoplastic housing and 7 blade impeller. Three 7" pigtail leads with 3-pin connector (0.1" centers). Third lead is for sensing rotation. Prepped with metal finger guard. UL, CSA, CUL, CE.
CAT# CF-153

---

@barhampa wrote:

If ordering off Dell the front fan assembly is 09946 and the rear fan is 378FT.

---

Rear FAN ASSY, 120X25MM, HISPD - Back Panel
(System) Fan JMC Datech 1225-12HBA 12V 0.60 Ah
Compatible Models for Dell DP/N 9946, 09946

PowerEdge 2200, PowerEdge 2300, PowerEdge 2400

Notes: ASSY,Front FAN,120X38MM,12V,HISPD Front Panel
(Hard-Disk Drive) Fan NMB 4715KL-04W-B59 12V 1.30 Ah
Compatible Models for Dell DP/N 378FT, 0378FT

PowerEdge 2400

Looks like the Front fan is different than on the 2300 but the rear fan is identical.

Thanks fellas.