Unsolved
This post is more than 5 years old
3 Posts
0
8195
April 4th, 2007 12:00
PowerEdge 2950 Netware Ham driver
Does anyone know what the version of the .ham driver is that I would need for the P.E. 2950 for Netware 6.5 SP3? On a new install the O.S. keeps asking for this driver and I cannot get past the driver install to install the rest of the O.S. Thanks.
No Events found!
Mark_A_Smith
2 Intern
•
827 Posts
0
April 4th, 2007 18:00
kunzman
3 Posts
0
April 5th, 2007 11:00
erniecars
26 Posts
0
April 14th, 2008 19:00
You most likely need the Perc5i driver. Thats what I use with a pretty basic installation. As of at least 6.5 SP5, that driver is included on the netware install disc. Also, make sure you duplicate the entry in your startup cfg file (via nwconfig) or else the driver will not load on reboots. It has to try twice, failing the 2nd time on a cold boot, and failing the first time on a reboot... that is unless someone has fixed this problem and I am not aware.
BTW, I thought only SP5 and up are supported on 2950s, so I cant say whether the drive will work at all on SP3... sorry.