Unsolved
This post is more than 5 years old
1 Rookie
•
3 Posts
0
19131
July 25th, 2016 07:00
Poweredge R210 II RAM compatibility question
Hi all.
Is the following RAM compatible with my PE R210 II with Pentium G850 processor? (Pack of 2 8GB DIMMS)
Product Specifications
Brand Crucial
Form Factor UDIMM
Total Capacity 8GB X2
Warranty Limited Lifetime
Specs DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.5V • 1024Meg x 64 •
Series Crucial
ECC NON-ECC
Module Qty 1
Speed 1600 MT/S
Tracer False
Voltage 1.5V
DIMM Type Unbuffered
I am having a real nightmare of a time, any help appreciated!! Thanks in advance.
No Events found!
theflash1932
11 Legend
•
16.3K Posts
1
July 25th, 2016 09:00
It would appear so:
http://www.crucial.com/usa/en/compatible-upgrade-for/Dell/poweredge-r210-ii
https://www.dell.com/downloads/global/products/pedge/en/poweredge-r210-ii-technical-guide.pdf
What kind of problems have you had?
Tension
1 Rookie
•
3 Posts
0
July 25th, 2016 09:00
There was RAM advertised on ebay specifically for the R210 II. Turns out it is buffered so I cant use it apparently?
Tension
1 Rookie
•
3 Posts
0
July 25th, 2016 10:00
Thanks for the info. The problem is that the RAM is very expensive. I have been looking on eBay, can you see anything on there that would work for me? I'm in the UK. The cheaper the better. I'm looking for 32GB
theflash1932
11 Legend
•
16.3K Posts
0
July 25th, 2016 12:00
Robert is right ... I didn't catch the "non-ECC" line ... must be ECC. Buffered also will not work - UDIMM's only.