PowerEdge R410 server certificate is invalid

Hello Артем ,

Have you used the iDRAC before?

Can you let us know anything that was done the server around the time the issue started?

Try give a flea power drain and check results:

drain flea power (shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed). After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize.

The warnings about the SSL Certs a pretty normal when using an unknown CA which your browser doesnt trust and a selfsigned cert. There is nothing wrong.

Within the GUI but for sure with racadm and mabe trough SSH you can reset all SSL related stuff within the iDRAC. The iDRAC reboot and recreate the needed Certs.

We swap certs against our own and the browser have importet the company RootCA for a complete chain of trust. So no Warnings.

An iDRAC6 only supports JAVA or ActiveX for the console.  Whats happend when pressing "continue"?

If you have a long running iDRAC you could "reset", which means reboot, the iDRAC. You should try that first.

Regards,
Joerg

@Origin3k​ 

If you click next, an error appears.

Error Details

@Dell - Чарльз The whole point is that they did nothing. Look carefully at my screenshots, they clearly show that the certificate has expired. And this does not apply to the certificate in the browser.
I updated to the latest firmware and the results did not change.