Poweredge T100-II memory

Question

Hi Can I mix low voltage memory with regular voltage memory PC3 with PC3L? Can I mix 10600 with 12800 memory? Thank you

Dell-DylanJ · Answer

Mixing normal and low voltage memory is supposed to be possible, however, no low voltage DIMMs were validated for this platform. The DIMMs I'm looking at in the parts list all show as operating on 1.8v.

bshlomo · Answer

Hi

From what I checked

I can use 1.35v or / and 1.5 v

in no place, I saw 1.8 v memory

In table 9 page 26 in PowerEdge T110 II Technical Guide https://cdn.shopify.com/s/files/1/0248/8539/5502/files/Dell-PowerEdge-T110-II.pdf?2422

also written 1.35v or/and 1.5 v, then why 1.8 V?

please clarify?

thank you

Dell-DylanJ · Answer

Are you asking about the T100 or the T110 II?

The T100 has all DIMMs listed similar to this:

1GB, DIMM, 667MHz, 128x72, Unbuffered, DDR2, 240 Pin, Dual Rank, 1.8V, Error Correction Code

All with a 1.8v rating.

If you're asking about the T110 II, then yes, they are all 1.5 or 1.35 volts.

PowerEdge Hardware General

Poweredge T100-II memory

Was this post helpful?