Problem with memory

Question

I have a dell poweredge r910 server, I decided to replace the RAM with a better one, the server has 4 Xeon E7-4870 processors and 4 raisers, I installed 16 sticks of 16 gigabytes each, 4 in each raiser, Micron MT36JSF2G72PZ-1G9E1HF Model: 16GB 2Rx4 PC3-14900R-13-13-E2 ​​1866MHz, I get an error when starting the server E2026 Fatal memory initialization error. Contact support, I understand that processors are not compatible with RAM, why and what can be done in my case to solve the problem?

DELL-Young E · Answer

Hello thanks for choosing Dell. What memories are you using? Do you plan to adopt and plug the new ones only or are you planning to mix with old one as well?

Attemp · Answer

Memory: Micron MT36JSF2G72PZ-1G9E1HF Model: 16GB 2Rx4 PC3-14900R-13-13-E2 ​​1866MHz   'Do you plan to adopt and plug the new ones only or are you planning to mix with old one as well?' No.

DELL-Erman O · Answer

Hi, I checked that DIMM 'MT36JSF2G72PZ-1G9E1HF' but I can't see it's supported for R910. I'm not sure is there a workaround for that.

DELL-Erman O · Answer

I can't tell does this processor support 1866mhz or not. I don't have any matrix list for that. However here are some 16GB DIMM for R910. And I can't see any 1866Mhz DIMM between them.

Part Number	Functional Description
0RTP1	16GB, DIMM, 1600MHZ, 4GX72, Registered, DDR3L, 240 Pin, Dual Rank, 1.35V, Error Correction Code, Lo...
CP5NF	16GB, RIMM, 1067MHZ, Registered, DDR3, 240 Pin, 1.35V, Error Correction Code, Low Voltage
G5JJX	16GB, DIMM, 1600MHZ, 4GX72, Registered, DDR3L, 240 Pin, Dual Rank, 1.35V, Error Correction Code, Lo...
HMNTG	16GB, DIMM, 1333MHZ, Registered, DDR3, 240 Pin, Dual Rank, 1.35V, Error Correction Code, Low Voltage
KTH1G	16GB, DIMM, 1333MHZ, Registered, DDR3, 240 Pin, Dual Rank, 1.35V, Error Correction Code, Low Voltage

Attemp · Answer

What modules does it support and is it compatible with these processors? and does this processor support 1866 mhz?

PowerEdge Hardware General

Was this post helpful?