Unsolved
This post is more than 5 years old
7 Posts
0
1542
October 14th, 2019 16:00
R710 motherboard without interrupt remapping issues
Is there any R710 motherboard that does not have issues with interrupt remapping (Errata #47 and #53 of Intel 55xx Chipset)?
In short: Is there a motherboard for Dell R710 that has an Intel 5520 Chipset with C2 Stepping?
If yes, can you please provide me a part number.
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
October 15th, 2019 10:00
Hello
I think all of the V2 or V3 boards are C2 and C3. The only boards that I show are C1 are the initial release. If you are looking for C2 specifically, XDX06. This is a C3 board, YMXG9.
Thanks
Afx_DL
7 Posts
0
October 15th, 2019 15:00
I installed a YMXG9 and it seems it has an old 5520 chipset as running
lspci -n | grep "8086:342e"
gives me the following output
8086:342e (rev 13)
The "rev 13" indicates it has B-3 stepping (pleae see my linked document and search for "13h").
Afx_DL
7 Posts
0
October 16th, 2019 11:00
Can you please answer in a timely manner as if there is any board out there with a C2-Stepping 5520 Chipset I need to buy it and get it shipped to me as fast as possible. Thank you
Afx_DL
7 Posts
0
October 17th, 2019 15:00
Is there anyone with a V2 board that can post the output of the following (linux) command:
lspci -n | grep "8086:342e"
Part numbers YMXG9 and 00NH4P are already tested and confirmed faulty:
Afx_DL
7 Posts
0
October 22nd, 2019 10:00
MD99X is also faulty. You guys are ingredible. Building the same server with the same faulty components over and over again although there is an updated revision and although you build a "V2" variant.