Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

Nooknik

13 Posts

31723

August 3rd, 2005 02:00

Stuck on start up; please help!!!

Dear sir,
    
        Here is my situation.  During setup the network to all computer, I accidently fill in IP address to PE1850 same to another computer in the network. Then everytime I start up this PE1850, BIOS will show up this massage.
 
                                                                                                                                           F2 = Setup
                                                                                                                                 F10 = Utility Mode
                                                                                                                                   F12 = PXE Boot
Two 3.6 GHz Processors , Processor Bus: 800 MHz, L2 Cache: 1 MB
 
Remote Access Controller detect
 
LSI Logic Corp. MPT BIOS
 
Copyright 1995-2004 LSI Logic Corp.
 
MPTBIOS - 5.06.06
 
Spinning up the device! HBA 0 , ID  0 , LUN 0
 
Spinning up the device! HBA 0 , ID  1 , LUN 0
 
Searching for device at HBA 0 , ID  0 , LUN 0
 
Drive 0 on adapter 0 is predicting a future failure. The sense qualifer is 00h
 
Press any key to continue.....
 
 
                Any way I could solve this trouble? Any answer are greatly appreciate.
 
                                                                                                                 Best regard
 
                                                                                                                   Nooknik 
 
          

barhampa

718 Posts

August 3rd, 2005 09:00

It would appear that you have a predictive failure on your first disk drive.
Best to back up the drive and replace it.

Nooknik

13 Posts

August 4th, 2005 00:00

Thanks for the reply,    It's seem for me that the harddisk is still working fine. While the BIOS massage show up , I only need to hit any key in order to let's computer load Win2003. Somehow, keep hitting the keyboard every working-day just for the start up is driving me mad. By the way, I've fixed all the network connection already so , I think It should be a way to skip this BIOS warning.

Message Edited by Nooknik on 08-03-2005 08:53 PM

Was this post helpful?

View All

No Events found!

Top