This post is more than 5 years old
8 Posts
0
1282
June 3rd, 2020 16:00
temp sensors r610
Im getting a system shutdown and random times. The system logs in Dell osma say
The system board IOH THERMTRIP temperature is outside of range. |
when i check the impi tool i see most sensors are off how do i re-enable these sensors and how do i see the thermal trip range and change or modify it
No Events found!
deltaop
8 Posts
0
June 9th, 2020 10:00
i fixed it i change the max fan speeds to something a bit faster of a rpm and that seems to fix it
DELL-Joey C
Moderator
•
4.2K Posts
•
21K Points
0
June 3rd, 2020 21:00
Hi,
Could you check if iDRAC and BIOS are running at updated firmware. You can check the thermal range in iDRAC but you cannot modify the most of the range.
deltaop
8 Posts
0
June 5th, 2020 10:00
Sure ill take a peed and see whats happening there.