Unsolved
This post is more than 5 years old
4 Posts
0
69694
March 11th, 2016 12:00
Tool to see what Server Types specific RAM fits into?
Community,
I have some 4Rx4 PC3 8500R 7-10-F0 240 pin RAM. Is there a tool anywhere I can type this info into and results would display what PowerEdge Servers it could be installed in?
Or, if anyone just happens to know off hand.
Thanks!
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
March 11th, 2016 22:00
Most 10G/11G servers (R610, R710, etc.) will take it ... just have to check the specs for the server in question.
Admin4U
112 Posts
0
March 12th, 2016 16:00
Flash is not correct on this, this memory is DDR3 and will not work on DELL 10G Servers as they take DDR2 memory. Flash meant to say 11/12G should take this memory, assuming you have a processor that supports RDIMMS.
theflash1932
11 Legend
•
16.3K Posts
0
March 13th, 2016 14:00
Indeed, I would have meant 11G or later ... 10G servers were a pretty insignificant step for Dell ... in my mind I went from the 2950 (did not support DDR3) to its direct replacement, the R710 (which did support DDR3), although the 2950 did not have a 10G replacement or equivalent.
macc23
4 Posts
0
March 14th, 2016 12:00
Thanks Admin for the clarification! Appreciate the help!
Admin4U
112 Posts
0
March 15th, 2016 01:00
It is no nice when you hear back from other's. Well done Flash also.