1. You can find the RAID controller during POST, in Device Manager after SCSI/RAID/Storage Controllers, or in the OMSA software under Storage.
3. RAID level can be found in the BIOS utility (CTRL-R or CTRL-C during POST) or using OMSA (Storage, PERC, Virtual Disks). You can also make a good guess based on how much total partition/disk space you have.
theflash1932
9 Legend
•
16.3K Posts
0
September 17th, 2014 23:00
You can add disks to your RAID 5 (?), making it bigger. You need to use the OpenManage software to initiate a Reconfigure.
Which RAID controller?
Which OS?
What RAID level?
Joekanan
1 Rookie
•
21 Posts
0
September 18th, 2014 20:00
could you tell me the steps?
thx
theflash1932
9 Legend
•
16.3K Posts
0
September 19th, 2014 13:00
No, not until you answer my questions:
Which RAID controller?
Which OS?
What RAID level?
Joekanan
1 Rookie
•
21 Posts
0
September 22nd, 2014 21:00
1. Where can I find the RAID COntroller ?
2. It is Windows Server R3 - 64 Bit
3. Where can I find the RAID Level
theflash1932
9 Legend
•
16.3K Posts
0
September 22nd, 2014 22:00
1. You can find the RAID controller during POST, in Device Manager after SCSI/RAID/Storage Controllers, or in the OMSA software under Storage.
3. RAID level can be found in the BIOS utility (CTRL-R or CTRL-C during POST) or using OMSA (Storage, PERC, Virtual Disks). You can also make a good guess based on how much total partition/disk space you have.