Unsolved
This post is more than 5 years old
2 Posts
0
3008
August 24th, 2016 16:00
change boot order of array with SAS 6/iR Adapter RAID Controller
Hi, i have a server running with a SAS 6/iR Adapter RAID Controller (firmware 00.25.47.00.06.22.03.00) and created a second array.
It seems the controller only boots the first array. I can't find any option to select the other array. I have searched in the BIOS, the boot menu (F11) and also in the configuration utility of the RAID card. but no luck.
I hope this is possible.
No Events found!
DELL-Chris H
Moderator
•
9.6K Posts
0
August 25th, 2016 09:00
Kshesq,
Unfortunately with the SAS6/ir you are not able to dictate the bootable Virtual Disk, it is indeed controlled by the order the Virtual Disk was created. If you were using the Pec6/i it would have the option you are looking for, but just not with the SAS6/ir.
Let me know if this helps clarify things.
kshesq
2 Posts
0
August 25th, 2016 12:00
thanks for you answer. unfortunately not the answer i was hoping for, but thats life....