Unsolved
This post is more than 5 years old
6 Posts
0
2216
June 10th, 2009 08:00
Help with RAID setup
I have a Poweredge 1750 and 2 scsi drives setup in RAID1 using the onboard Perc4. I would like to add a third drive as a stand alone storage but can find no way to add it to the system where windows 2003 will detect it. I assume I'll have to configure the drive in the RAID manager but I'm not sure how. Is there an article on how to do this?
Thanks in advance.
0 events found
No Events found!
Dennis Smith
946 Posts
0
June 10th, 2009 10:00
Here is the user's guide for the controller. You can set the drive up as a RAID 0 and then it will most likely show up as unallocated in Disk management.