2 Posts
0
578
December 12th, 2021 01:00
PERC CLI on R620 has no Enclosure ID
Why CLI of PERC on R620 has no Enclosure ID for SSD?
The "percli64 /c0 show" show EID=32 for SAS and HDD, but show no EID. So, I can run execute command which need IED such as:
./percli64 /c0 add drives=EID:SLOT
Any idea to pass drives params without EID?
NB: currently I must use iDRAC WebUI to add SSD, rather than cli.
No Events found!
DELL-Erman O
Moderator
•
2.9K Posts
0
December 13th, 2021 00:00
Hello,
Are the PERC and iDRAC firmware up to date? If not, you can update it here. https://dell.to/3DQSwGC
Are the SSDs you are talking about Dell drives, if they are not certified, it may be possible that the EID does not appear.
Let us know how it goes!