PowerEdge Server Integrated Raid

Hello RavenRB,

 

I'm not able to view the whole error message on the image.

Could you post another with the entire message?

 

Could you also post your server model?

 

Judging by the title of the thread it may be the Integrated RAID controller.

 

I would recommend to start with  Drain flea power, reseat controller and cable, then check results:

 

drain flea power (shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed).

 

*Reseat PERC controller and cable at this point.

 

After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize.