Unsolved
This post is more than 5 years old
1 Rookie
•
10 Posts
0
61415
February 15th, 2016 21:00
Procedure to replace failed HDD in RAID-0
Hi,
Would appreciated if anyone let me know the steps to replace the failed HDD in RAID-0. Is it possible to do online? If so, how?
Model: PE 710
0 events found
No Events found!
theflash1932
11 Legend
•
16.3K Posts
1
February 15th, 2016 21:00
To replace drive in RAID 0: Insert new drive, delete the array (Virtual Disk), create new array, restore from backup. RAID 0 is not redundant - there is no way to replace a drive in a RAID 0 without wiping out and starting over.
You should never use RAID 0. Are you sure that is what you are using?
pradeep8985
1 Rookie
•
10 Posts
0
February 16th, 2016 00:00
Can we create array online from the OS level? OS running is Redhat.
theflash1932
11 Legend
•
16.3K Posts
0
February 16th, 2016 06:00
Only if you have OMSA installed.
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=1PTFX&fileId=3498564499&osCode=RH60&productCode=poweredge-r710&languageCode=EN&categoryId=SM
Supegi
1 Message
0
April 6th, 2019 11:00
Hi.
Could you please help me with this?:
1. Can I take out the disk that i need to replace first and then insert the new one in? After that delete the array and then create the new one. Or do i have to keep both disk in, in order to delete the array ?
Thanks!