Unsolved
This post is more than 5 years old
1 Rookie
•
6 Posts
0
9114
February 8th, 2013 11:00
Raid 1+0 setup
How do i configure my Dell T3500 server for Raid 1+0?
I have the following:
SATA0 = 160GB SYS Disk1
SATA1 = 160GB SYS Disk2
SATA2 = 500GB Data Disk1
SATA3 = 500GB Data Disk1
SATA4 = DVD
SATA5 = eSATA
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
February 8th, 2013 13:00
You can configure your four disks in a RAID 10 (1+0), HOWEVER, you will only be using 160GB PER DISK, meaning you will be wasting most of the capacity of your 500GB disks, giving you a total capacity of around 320GB in your OS. You might consider two RAID 1's instead.
Also, you need the PERC 6/i to do this. Which controller do you have?
osprey4
6 Operator
•
34.2K Posts
0
February 8th, 2013 13:00
Hi Bimmster,
I'm going to move your thread to the server forum for more help.