Unsolved
This post is more than 5 years old
3 Posts
0
1095
August 18th, 2017 06:00
Raid type conversion on Dell PowerEdge VRTX
Hi,
I have a Dell PowerEdge VRTX with two PERC8 controllers. There is a RAID0 of one disk, and I would like to Know if its posible to migrate this RAID0 to a RAID1, adding one disk.
I have been seraching any option for doing this migration, but I haven't found it.
Thank you.
Best regards.
Ruben Garcia.
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
August 18th, 2017 10:00
Hello
RAID level migration, also known as reconfigure, is not a feature of the shared PERC. OMSA is required to perform reconfigure tasks on our PERCs. The OMSA storage manual has a list of migrations that are possible from each of the supported controllers. The SPERC is not a supported controller for this task.
www.dell.com/support/home/product-support/product/dell-openmanage-server-administrator-8.5/manuals
Thanks