Disk migration between a PERC H710 and an S110 is not supported. The S110 is embedded into the system board. Unless you replaced the system board, you did not replace the S110. The SATA mode in the system BIOS was probably set to RAID by someone trying to troubleshoot the issue. That would enable the S110.
Daniel My
10 Elder
•
6.2K Posts
0
October 11th, 2018 09:00
Hello
Disk migration between a PERC H710 and an S110 is not supported. The S110 is embedded into the system board. Unless you replaced the system board, you did not replace the S110. The SATA mode in the system BIOS was probably set to RAID by someone trying to troubleshoot the issue. That would enable the S110.
http://www.dell.com/support/
http://www.dell.com/storagecontrollermanuals/
Thanks