Unsolved
This post is more than 5 years old
2 Intern
•
129 Posts
0
6251
February 3rd, 2017 10:00
should perccli report raid10 inconsistent ?
hi everyone
I'm seeing this below and I wonder why?
...
/c0/v1 :
======
---------------------------------------------------------------
DG/VD TYPE State Access Consist Cache Cac sCC Size Name
---------------------------------------------------------------
3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB
---------------------------------------------------------------
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
PDs for VD 1 :
============
-----------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
-----------------------------------------------------------------------
50:0 76 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:1 75 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:2 57 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:3 181 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:4 33 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:5 179 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:6 37 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:7 45 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:8 36 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:9 28 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:10 46 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:11 31 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:12 26 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:13 43 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:14 27 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:15 29 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:17 53 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:18 55 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:19 89 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:20 54 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
-----------------------------------------------------------------------
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded
VD1 Properties :
==============
Strip Size = 64 KB
Number of Blocks = 39059456000
Span Depth = 2
Number of Drives Per Span = 10
Write Cache(initial setting) = WriteBack
Disk Cache Policy = Enabled
Encryption = None
Data Protection = None
Active Operations = Background Initialization (0%)
Exposed to OS = Yes
Creation Date = 03-02-2017
Creation Time = 04:14:41 PM
Emulation type = None
#end
Would you know if this is normal?
I also cannot start consistency check:
$ perccli /c0/v1 start cc force
Controller = 0
Status = Failure
Description = None
Detailed Status :
===============
------------------------------------------------
VD Operation Status ErrCd ErrMsg
------------------------------------------------
1 CC Failed 1001 Start CC not possible
------------------------------------------------
to me it's weird, but then, it's my fist raid10 on Dell hardware.
many thanks,
L.
I'm seeing this below and I wonder why?
...
/c0/v1 :
======
---------------------------------------------------------------
DG/VD TYPE State Access Consist Cache Cac sCC Size Name
---------------------------------------------------------------
3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB
---------------------------------------------------------------
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
PDs for VD 1 :
============
-----------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
-----------------------------------------------------------------------
50:0 76 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:1 75 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:2 57 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:3 181 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:4 33 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:5 179 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:6 37 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:7 45 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:8 36 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:9 28 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:10 46 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:11 31 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:12 26 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:13 43 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:14 27 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:15 29 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:17 53 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:18 55 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:19 89 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
50:20 54 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U
-----------------------------------------------------------------------
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded
VD1 Properties :
==============
Strip Size = 64 KB
Number of Blocks = 39059456000
Span Depth = 2
Number of Drives Per Span = 10
Write Cache(initial setting) = WriteBack
Disk Cache Policy = Enabled
Encryption = None
Data Protection = None
Active Operations = Background Initialization (0%)
Exposed to OS = Yes
Creation Date = 03-02-2017
Creation Time = 04:14:41 PM
Emulation type = None
#end
Would you know if this is normal?
I also cannot start consistency check:
$ perccli /c0/v1 start cc force
Controller = 0
Status = Failure
Description = None
Detailed Status :
===============
------------------------------------------------
VD Operation Status ErrCd ErrMsg
------------------------------------------------
1 CC Failed 1001 Start CC not possible
------------------------------------------------
to me it's weird, but then, it's my fist raid10 on Dell hardware.
many thanks,
L.
No Events found!
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.5K Points
0
February 3rd, 2017 12:00
Hi,
It looks like the array is still doing the background initialization on the array, this may be why it will not let you do a consistency check.
lejeczek
2 Intern
•
129 Posts
0
February 3rd, 2017 12:00
hi Josh,
>
well, I'm not so sure...
$ perccli /c0/v1 show init
Controller = 0
Status = Success
Description = None
VD Operation Status :
===================
-----------------------------------------------------------
VD Operation Progress% Status Estimated Time Left
-----------------------------------------------------------
1 INIT - Not in progress -
-----------------------------------------------------------
$ perccli /c0/v1 start init force
Controller = 0
Status = Failure
Description = None
Detailed Status :
===============
-------------------------------------------------
VD Operation Status ErrCd ErrMsg
-------------------------------------------------
1 INIT Failed 1001 Start FGI not possible
-------------------------------------------------
there are two more raid volumes in that chassis under a one H800. The whole lot:
DG/VD TYPE State Access Consist Cache Cac sCC Size Name
---------------------------------------------------------------
0/0 Cac0 Optl RW Yes RWTD - OFF 512.0 GB
3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB
1/2 RAID0 Optl RW Yes RWBC R OFF 38.195 TB
2/3 RAID0 Optl RW Yes RWBC R OFF 12.731 TB
---------------------------------------------------------------
All these disks currently in raid10, plus one more, were before parts of a raid5 volume and all was a OK.
Although inconsistent the volume is in the OS and appears normal.
it's quite a puzzle to me.
thanks
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.5K Points
0
February 3rd, 2017 13:00
What OS are you using? You may want to install server administrator.
lejeczek
2 Intern
•
129 Posts
0
February 3rd, 2017 14:00
it's Centos 7.3
OS should not play any role here, right ?
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.5K Points
0
February 3rd, 2017 14:00
Try installing OMSA and see if it lets you run a consistency check. http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=KJK52&fileId=3592543700&osCode=RHE70&productCode=poweredge-r730&languageCode=en&categoryId=SM
lejeczek
2 Intern
•
129 Posts
0
February 8th, 2017 09:00
there is something troubling here happening:
this VD was created with omconfig:
$ omreport storage vdisk controller=1
List of Virtual Disks on Controller PERC H800 Adapter (Slot 6)
Controller PERC H800 Adapter (Slot 6)
ID : 0
Status : Ok
Name : Virtual Disk0
State : Background Initialization
Hot Spare Policy violated : Not Assigned
Encrypted : No
Progress : 0% complete
Layout : RAID-10
Size : 5,588.00 GB (6000069312512 bytes)
T10 Protection Information Status : No
Associated Fluid Cache State : Not Applicable
Device Name : /dev/sdb
Bus Protocol : SATA
Media : HDD
Read Policy : Adaptive Read Ahead
Write Policy : Write Back
Cache Policy : Not Applicable
Stripe Element Size : 64 KB
Disk Cache Policy : Enabled
perccli /c1/v0 show
Controller = 1
Status = Success
Description = None
Virtual Drives :
==============
-----------------------------------------------------------------------
DG/VD TYPE State Access Consist Cache Cac sCC Size Name
-----------------------------------------------------------------------
0/0 RAID10 Optl RW No RWBD - OFF 5.457 TB Virtual Disk0
-----------------------------------------------------------------------
would you, anybody @Dell know this error codes:
$ perccli /c1/v0 start cc
VD Operation Status ErrCd ErrMsg
------------------------------------------------
0 CC Failed 1001 Start CC not possible
------------------------------------------------
I've tried two different PE815, firmware on both is the same, DSU used.
Both systems have different chassis makes attached(although LSI in both I imagine).
I see this on both.
JanBer
2 Posts
0
June 26th, 2018 00:00
Hello, were you able to find solution or reason for this? Iam having the same trouble and there is not much to google about it :/
root@vod0-iva:~# perccli /c0/v1 start init
Controller = 0
Status = Failure
Description = None
Detailed Status :
===============
-------------------------------------------------
VD Operation Status ErrCd ErrMsg
-------------------------------------------------
1 INIT Failed 255 Start FGI not possible
-------------------------------------------------
root@vod0-iva:/mnt# perccli /c0/v1 start cc
Controller = 0
Status = Failure
Description = None
Detailed Status :
===============
------------------------------------------------
VD Operation Status ErrCd ErrMsg
------------------------------------------------
1 CC Failed 255 Start CC not possible
------------------------------------------------
root@vod0-iva:/mnt# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 2.7T 0 disk
|-sda1 8:1 0 9M 0 part
`-sda2 8:2 0 2.7T 0 part
`-vg.system-lv.root 254:0 0 80G 0 lvm /
sdb 8:16 0 24.6T 0 disk
sdc 8:32 0 24.6T 0 disk
sdd 8:48 0 24.6T 0 disk
sde 8:64 0 24.6T 0 disk
sdf 8:80 0 24.6T 0 disk
sdg 8:96 0 24.6T 0 disk
sdh 8:112 0 24.6T 0 disk
sdi 8:128 0 138.8G 0 disk
VD LIST :
=======
-----------------------------------------------------------------
DG/VD TYPE State Access Consist Cache Cac sCC Size Name
-----------------------------------------------------------------
0/0 RAID1 Optl RW No RWBC - OFF 2.728 TB system
1/1 RAID50 Optl RW No RWTD - OFF 24.556 TB vol1
2/2 RAID50 Optl RW No RWTD - OFF 24.556 TB vol2
3/3 RAID50 Optl RW No RWTD - OFF 24.556 TB vol3
4/4 RAID50 Optl RW No RWTD - OFF 24.556 TB vol4
5/5 RAID50 Optl RW No RWTD - OFF 24.556 TB vol5
6/6 RAID50 Optl RW No RWTD - OFF 24.556 TB vol6
7/7 RAID50 Optl RW No RWTD - OFF 24.556 TB vol7
-----------------------------------------------------------------
cmshowers
1 Rookie
•
2 Posts
0
May 3rd, 2022 11:00
It is probably doing a background init as opposed to a regular foreground init. Check with:
perccli /c0/v1 show bgi
Once it's finished, you can start the cc. Which probably happened 5 years ago for the OP