This post is more than 5 years old
2 Posts
0
58289
February 18th, 2016 06:00
T320 Perc 710 raid 1 disk Replacement
Virtual Disks
| Status | Name | State | Hot Spare Policy violated | Tasks | Layout | Size | Device Name | Bus Protocol | Media | Read Policy | Write Policy | Stripe Element Size | Disk Cache Policy | |||
| Virtual Disk 0 | Degraded | Not Assigned | Available Tasks Delete ... Assign/Unassign Dedicated Hot Spare ... Blink Unblink Rename ... Change Policy ... Replace Member Disk ... | Execute | RAID-1 | 1,843.20GB | Windows Disk 0 | SAS | HDD | Adaptive Read Ahead | Write Back | 64 KB | Disabled | |||
| Virtual Disk 1 | Degraded | Not Assigned | Available Tasks Delete ... Assign/Unassign Dedicated Hot Spare ... Blink Unblink Rename ... Change Policy ... Replace Member Disk ... | Execute | RAID-1 | 950.80GB | Windows Disk 1 | SAS | HDD | Adaptive Read Ahead | Write Back | 64 KB | Disabled | |||
What this is showing is the working 3TB in slot 1 and I have replaced the 3TB in slot 0 with same make from DELL and that drive shows ready but how do I get the rebuild going?
This is what the Physical Disk shows and s/n 9XK0K5CL is the new disk that needs to be rebuilt.
| Physical Disks on Controller PERC H710 Adapter |
| Status | Name | State | Power Status | Tasks | Bus Protocol | Media | Failure Predicted | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Physical Disk 0:1:0 | Ready | Spun Up | Available Tasks Blink Unblink Assign Global Hot Spare | Execute | SAS | HDD |
No
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Physical Disk 0:1:1 | Online | Spun Up | Available Tasks Blink Unblink | Execute | SAS | HDD |
No
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Physical Disks on Controller PERC H710 Adapter |
0 events found
No Events found!


randuncan
2 Posts
0
February 18th, 2016 09:00
Thanks Robert, Only other question I have is does it effect the use of other drive while its rebuilding? If so I will need to wait till Saturday.