Unsolved
This post is more than 5 years old
1 Message
0
56900
December 15th, 2002 12:00
Trap 00000006 =====EXCEPTION====
Upon powering on Precision 330, I get
Trap 00000006 Exception
tr=0028 cr0=00000011 cr2=00000000 cr3=00000000
gdt limit=03ff base=00017000 idt limit=07ff base=00017400 cs:eip=0008:0031D766 ss:esp=0010:00061FED errcode=0000
flags=00010006 NoCy NoZr IntDis Down TrapDis
When using Dell Resource CD for diagnostics, I get the message:
unable to find any AIC-7890/91
ASPI8U2.sys installation failed.
Any advice on how to fix this?
Thanks.
No Events found!


Dernalis
1 Message
0
December 18th, 2002 07:00
I've tryed with a Dimension an it appears to work.
Open de Bios Setup and change de CPU Speed to Compatibility Mode.
Get Luky (And Sorry my pour English...)
Regards...
Alx
cdidp
1 Message
0
April 5th, 2003 18:00
SPE2000
1 Message
0
February 1st, 2004 05:00
Trap 00000006 Exception Error
I have a Poweredge 2400 server running Win 2K Server. First thing I saw when I went to office was this message: "No bootable device detected". I tried everything and then Dell support tried everything. Now the system starts and gives "Trap 00000006 Exception Error" with the standard data. After surfing forums I tried the jsinc method of repairing the Windows 2K installation, but when I try to Repair OR clean install win 2k again, it gives error message saying "No hard drives detected, make sure blah blah...."
The system is Poweredge 2400 833 MHz, with 4 SCSI Drives running on RAID 5. I have updated the firmware, BIOS etc too.
Now I need to get data out of the Hard Disks ASAP, as my office is suffering because of this problem. Do I order a new Motherboard with new DIMM and hardware key OR is there a better suggestion.
Any help at the earliest will be highly appreciated.
Thanks
SPE
Lightboy245
25 Posts
0
May 27th, 2004 00:00
TRAP 0000006 ==========EXCEPTION============
tr=0028 cr0=80000011 c2=00000000 cr3=00039000
gdt limit=03FF base=0003F000 idt limit=07FF base=0003F400
cs:eip=0008:8016500C ss:esp=0010:005FBF4 errcode=0000
flags=00010097 Cy NoZr IntDis Down TrapDis
eax=0005FC99 cbx=0005FFD8 eox=0000000A edx=004164D2
ds=0010 es=0010
edi=0005FD3A esi=0005FFFC ebp=0005FE1F er0=80000011
fs=0030 gs=0000
I did a repair install which fixed it the problem you needed to boot to the Windows cd that Dell provided you with an then run a repair install on the system. If that does not work you will need to reinstall your os. If You have any data that needed to be backed up there are a bunch of companies that specailize in that service one company is http://drivesavers.com/ or you can click on this link an it will give you a quote from a bunch of different vendors http://www.buyerzone.com/computers/backup-remote/qz_questions_7.jhtml?_requestid=14017
You do not know how to do this Please Call Dell Tech support for the consumer call 800-624-9896 Business Cust Call 800-822-8965
demogorgn
1 Message
0
May 7th, 2012 11:00
ok guys this is just one situtation i had with this error trap 00000006 error machine dell 170l
i tried everything bios options memory , reseated stuff.
then i checked the keyboard and mouse pins.
the keyboards pins were bent by the user by mistake while reseating it.
so i straightened them out and voila pc booted fine .
not saying this will fix all those issues with this problem but this is one of the solutions and something you can check.
Dev Mgr
6 Operator
•
9.3K Posts
0
May 7th, 2012 12:00
The last post (before yours) was from 2004, which was 8 years ago. Odds are that the original people that posted here no longer own the original system(s) in question.
rene_harboe
1 Message
0
August 11th, 2020 08:00
Don't be so sure!