Which RAID controller are you using? You likely need the driver. Also, depending on which PERC controller you are using, some do not support non-RAID, so you must configure RAID in the CTRL-R utility before any drives can be seen by the OS, even with the right drivers.
1. In Server BIOS F2 -> Can you ensure you have set SATA/ATA mode for detecting HDDs
2. While the server is booting - does it show Controller BIOS (CTRL + R) option for entering controller bios. If so can you key in CTRL + R and observe the HDDs display.
3. If you are having Software RAID (S110) instead of physical storage controller (H710/H310) can you observe the HDDs when keyed in CTRL + R for controller bios page?
4. Is the Server in BIOS mode ? (F2 -> Boot Mode -> BIOS)
If points 1 to 4 are as satisfied as expected, could you also attempt to install the OS on the server with DELL SMTD Iso support:
I just had this T320 and my problem now is i dont have any cd's, drives, manuals, etc. coz they shipped this from china. I tried to follow all instructions but failed to find the 2 500HDD installed (Dell Constellation).
Please help me to run the system. I tried ATA AHCI RAID and so on but failed to detect the hard drive.
Thank you for all your support and regards to all.
theflash1932
9 Legend
•
16.3K Posts
0
April 23rd, 2013 22:00
Which RAID controller are you using? You likely need the driver. Also, depending on which PERC controller you are using, some do not support non-RAID, so you must configure RAID in the CTRL-R utility before any drives can be seen by the OS, even with the right drivers.
Redhead01
9 Posts
0
April 23rd, 2013 22:00
hi theflash1932,
RAID-0
slot 6
PERC H310
DELL-Vivek S
1 Rookie
•
118 Posts
0
April 23rd, 2013 22:00
Readhead01,
Couple of questions for my understand:
1. In Server BIOS F2 -> Can you ensure you have set SATA/ATA mode for detecting HDDs
2. While the server is booting - does it show Controller BIOS (CTRL + R) option for entering controller bios. If so can you key in CTRL + R and observe the HDDs display.
3. If you are having Software RAID (S110) instead of physical storage controller (H710/H310) can you observe the HDDs when keyed in CTRL + R for controller bios page?
4. Is the Server in BIOS mode ? (F2 -> Boot Mode -> BIOS)
If points 1 to 4 are as satisfied as expected, could you also attempt to install the OS on the server with DELL SMTD Iso support:
Thanks
Vivek
Redhead01
9 Posts
0
April 23rd, 2013 22:00
Hi vivek,
1. Yes and I try ATA mode, AHCI mode and RAID mode.
2. Here is the result:
Virtual disk 2
Physical disk 2
Free cap.: 0
Free areas: o
Boot mode is bios
theflash1932
9 Legend
•
16.3K Posts
0
April 24th, 2013 10:00
PERC H310 Driver:
ftp.dell.com/.../DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe
Redhead01
9 Posts
0
April 24th, 2013 19:00
Hi theflash1932,
Thanks for the reply. i download the file and extra it. still i can't detect the HDD.
Redhead01
9 Posts
0
April 24th, 2013 20:00
yes i did run the EXE file. then transfer to USB and put in to T320. then i browse it to USB where the extracted file.
i try to select file but still no drive is been found.
theflash1932
9 Legend
•
16.3K Posts
0
April 24th, 2013 20:00
Did you run the EXE above to extract its contents? The EXE cannot be used as a driver file.
Describe how exactly you are trying to load the driver.
DELL-Manfred W
166 Posts
0
April 24th, 2013 20:00
Hi Redhead01
Perhaps you might want to try to install your OS through SMTD?
Like what DELL-Vivek S has mentioned:-
Let us know how it goes.
Redhead01
9 Posts
0
April 24th, 2013 21:00
Hi Guys,
one more problem; Where can i download the driver of Dell T320?
Redhead01
9 Posts
0
April 24th, 2013 21:00
Hi theflash1932,
it works now. thanks alot..
theflash1932
9 Legend
•
16.3K Posts
0
April 24th, 2013 22:00
Which driver?
Redhead01
9 Posts
0
April 24th, 2013 22:00
its said here a lot of:
base system devices
ethernet controller
performance counters
Mysh
1 Rookie
•
11 Posts
0
November 17th, 2013 10:00
Dear Sir,
I just had this T320 and my problem now is i dont have any cd's, drives, manuals, etc. coz they shipped this from china. I tried to follow all instructions but failed to find the 2 500HDD installed (Dell Constellation).
Please help me to run the system. I tried ATA AHCI RAID and so on but failed to detect the hard drive.
Thank you for all your support and regards to all.
Mysh