This post is more than 5 years old
8 Posts
0
16888
July 4th, 2013 07:00
configuration dell poweredge t610
Hi all,
I hope you guys can help me out with the following.
I have this server at the office: dell poweredge t610.
COnfigured with raid 5 .
Two of the harddisk failed, so i replaced them. after replacement, windows wont. boot. I installed a fresh setup of the windows 2008, after a reboot once the the setup was completed. I know get the following message:
Uncompressing Linux...ok, booting kernel.
Booting the system, please wait...
To begin replication, please insert your replication floppy.
Replication will begin once the system has booted.
I dont have a replication floppy.
How can i solve this?
No Events found!
theflash1932
9 Legend
•
16.3K Posts
1
July 4th, 2013 07:00
"I only missing the drivers for system interrup controler. does any one now which one are these?"
You need to install the chipset:
ftp.dell.com/.../INTEL_5500-5520-CHIPSET-SOFT_A03_R295077.exe
"Also what is the program called to control the raids from web?"
It is called OpenManage Server Administrator:
ftp.dell.com/.../OM-SrvAdmin-Dell-Web-WIN-7.3.0-350_A00.exe
theflash1932
9 Legend
•
16.3K Posts
1
July 4th, 2013 12:00
Just run the following from Windows, rebooting when prompted:
iDRAC:
ftp.dell.com/.../ESM_Firmware_CMDN0_WN32_1.95_A00.EXE
BIOS:
ftp.dell.com/.../T610_BIOS_5PXJV_WN32_6.3.0.EXE
PERC Driver:
2008 x86:
ftp.dell.com/.../SAS-RAID_Driver_CW1N9_WN32_2.24.0.32_A03.EXE
2008 x64:
ftp.dell.com/.../SAS-RAID_Driver_M4F88_WN32_2.24.0.64_A03.EXE
PERC Firmware:
ftp.dell.com/.../SAS-RAID_Firmware_F96NR_WN32_6.3.3-0002_X00.EXE
nico1988
8 Posts
0
July 4th, 2013 07:00
My apologies, in my rush i was booting from a bad cd. removed the cd now is booting correctly.
I only missing the drivers for system interrup controler. does any one now which one are these?
Also what is the program called to control the raids from web?
thanks
nico1988
8 Posts
0
July 4th, 2013 10:00
Many thanks for your quickly reply,
Just what i needed.
nico1988
8 Posts
0
July 4th, 2013 11:00
thanks for the help.. just wanted to ask one more think.
My fireware and drivers for controller perc6/i integrated is out of date.
Could you give me some guide in how to update this?
nico1988
8 Posts
0
July 5th, 2013 05:00
Many thanks. the system was successfully updated!