Hi

Take note about this...
(From ftp://dropbox.us.dell.com/dropbox2/ips/DSET/Readme-Linux.txt)

[...]
Recommended Hardware & Software Requirements
=======================================================================

* Dell PowerEdge(TM) 300, 350, 500SC, 600SC, 650, 700, 750, 1300, 1400SC,
1500SC, 1550, 1600SC, 1650, 1655MC, 1750, 1800, 1850, 2300, 2400, 2450,
2500, 2550, 2600, 2650, 2800, 2850, 4300, 4350, 4400, 4600, 6300, 6350, 6400,
6450, 6600, 6650, 8450 (PowerEdge 7150 and 3250 are not supported).
* Red Hat Enterprise Linux AS 2.1
* Red Hat Enterprise Linux (AS, ES, WS) 3.0 (does not support i386_64)
* Red Hat Linux 8.0 and 9.0 (limited support)
* Mozilla 0.9.9 or newer, Internet Explorer 5.0 or newer, or Netscape 7.0
(to view reports)
* A minimum of 64 megabytes (MB) of random-access memory (RAM)
* A minimum of 50 MB of free hard-disk space (includes temporary files).
More disk space may be needed when using advanced features (see below).
[...]

Redhat 7.3 is not supported :/

Luis Miguel Cruz

There is another option without DSET :)

With OMSA (I can't remember at this momment if OMSA is available to RH 7.3) but here you are the tip:

[...]
If you have OMSA installed on the server, you can just run the following
command:

# omconfig system esmlog action=clear
[...]

From http://lists.us.dell.com/pipermail/linux-poweredge/2005-January/018712.html