Unsolved
This post is more than 5 years old
1 Message
0
705
January 11th, 2007 08:00
Adapter visibility in PowerPath Administrator
Should the host adapters be visible under the Adapter tree in the scope pane of PowerPath Administrator, even if the storage has not yet been allocated? The particular host in question is running W2k3 SP1, with PowerPath 4.6.1 and the latest drivers/firmware for Emulex LP10000-E cards, however the question is open to any version of PowerPath
No Events found!
Allen Ward
6 Operator
•
2.1K Posts
1
January 11th, 2007 13:00
In our environment we don't the anything show up in the PowerPath GUI until there is actual storage allocated to the host from an array.
Usually I don't even see anything until the first LUN has been set up in Disk Manager and Windows can use it as a drive.
danrep
4 Posts
1
January 12th, 2007 08:00