Unsolved
1 Rookie
•
10 Posts
0
19
November 16th, 2025 07:05
Why secondary M2 on node does not work after fail Primary M2 (240G)
I am using powerstore 9200T with power OS = 4.1.0.1 (Release, Build 2529516, 2025-07-02 02:49:57, Retail).
Today my InternalM.2BootModule0 has failed so My node failed .
This is strange for me . As I know each node include two M2 disk disk0 (240G primary) disk1(120G secondary)
just want to know
1- why it does not use secondary M2 due failure primary M2 ?
2- Does secondary M2 just use for recovery OS after replace primary M2 ?
No Events found!
DELL-Josh Cr
Moderator
•
9.4K Posts
0
November 17th, 2025 13:15
Hi,
Thanks for your question.
It sounds like maybe the module with the m.2 cards may have failed. https://www.dell.com/support/manuals/en-us/powerstore-3200q/pwrstr-isg/remove-the-faulted-internal-m.2-boot-module?guid=guid-b3e5ccef-574d-4ee1-820b-245f4c6c247b&lang=en-us
Let us know if you have any additional questions.
tianchou
1 Rookie
•
102 Posts
0
December 1st, 2025 08:42
120G M.2 is only used for recovery. It is not the backup for 240G