Unsolved
This post is more than 5 years old
6 Posts
0
117912
February 11th, 2016 23:00
Error 62 : Moving Host to Host Group
Hello,
I'm getting the following error when i try to move an host to an host group.
Error 62 - The operation cannot complete because the logical unit number (LUN) is already in use. Please enter another LUN.
This is the detailed ouput of the error :
Application version: 10.84.G6.55
Storage array management version: 10.84.G6.55
Storage array name: MD3200
Firmware version: 07.84.44.60
Management class: devmgr.v1084api04.Manager
**************************************************
ERROR DATA
Command sent to RAID controller module in slot: 0
Host name: *.*.*.*
IP address: *.*.*.*
Return code: Error 62 - The operation cannot complete because the logical unit number (LUN) is already in use. Please enter another LUN.
Operation when error occurred: Moving Host
Timestamp: Feb 12, 2016 9:19:42 AM
STACK DATA
devmgr.v1084api04.sam.jal.ManagementOperationFailedException:
at devmgr.v1084api04.sam.jal.SYMbolClient.dispatchOperation(SYMbolClient.java:569)
at devmgr.v1084api04.sam.jal.StorageArrayFacade.issueCommand(StorageArrayFacade.java:10491)
at devmgr.v1084api04.sam.jal.StorageArrayFacade.sendCommandCommon(StorageArrayFacade.java:10037)
at devmgr.v1084api04.sam.jal.StorageArrayFacade.sendCommand(StorageArrayFacade.java:9964)
at devmgr.v1084api04.sam.jal.StorageArrayFacade.moveHost(StorageArrayFacade.java:7778)
at devmgr.v1084api04.sam.mapping.MoveHostDialog$4.performOp(MoveHostDialog.java:277)
at devmgr.v1084api04.shared.BackgroundTask.run(BackgroundTask.java:84)
THREAD DATA
Thread[Reference Handler,10,system]
Thread[Finalizer,8,system]
Thread[Signal Dispatcher,9,system]
Thread[Attach Listener,5,system]
Thread[Java2D Disposer,10,system]
Thread[TimerQueue,5,system]
Thread[AWT-Shutdown,5,main]
Thread[AWT-Windows,6,main]
Thread[EventQueueMonitor-ComponentEvtDispatch,5,main]
Thread[Thread-3,5,main]
Thread[AWT-EventQueue-0,6,main]
Thread[DestroyJavaVM,5,main]
Thread[SwingWorker-pool-2-thread-1,5,main]
Thread[ChangeDetector,6,main]
Thread[PreferenceStoreChangeDetector,6,main]
Thread[LogMsgThread,6,main]
Thread[Np_Link_Monitor0,6,main]
Thread[DMVGarbageCollectorThread,6,main]
Thread[RecoveryProfile-14,6,main]
Thread[AEN-15,6,main]
Thread[Timer-0,6,main]
Thread[SwingWorker-pool-2-thread-2,5,main]
Thread[Timer-9,6,main]
monimea
6 Posts
0
February 12th, 2016 01:00
I think that the problem is with "Access Lun31" is same for both the host which i want to move and the host group.
Now the question is, can i change the Access Lun number to for example 32 without loosing any data on the host ?
DELL-Sam L
Moderator
•
7.9K Posts
•
111 Points
0
February 19th, 2016 11:00
Hello monimea,
Is the host that you are trying to move part of another Host Group? If it is then you are going to want to follow the steps on page 58 for Moving A Host To A Different Host Group in the MDSM guide. http://downloads.dell.com/Manuals/Common/powervault-md3200_Administrator%20Guide_en-us.pdf
Please let us know if you have any other questions.
monimea
6 Posts
0
February 19th, 2016 13:00
It is a single host called HOSTC. There are 2 LUNs connected to it.
There is one Host Group that has two hosts under it : HOSTA and HOSTB.
HOSTA has 2 LUNs connected directly. HOSTB has 2 LUNs connected directly.
I know it's strange setup. My goal is to move HOSTC under the same host group with HOSTA and HOSTB.
I followed the MSDM guide but i received that eror.
DELL-Sam L
Moderator
•
7.9K Posts
•
111 Points
0
February 25th, 2016 11:00
Hello monimea,
Can I get you to create a support Bundle from your MD3200 so that we can look at it to see why it is not allowing you to move the host to a new host group. I will also send you a private message that you can reply back with the support bundle.
Please let us know if you have any other questions.