Incomplete Battery Learn Cycle - MD3000

You should contact Support about this. Here's the Storage site where you can ask the experts questions like this:

http://www.delltechcenter.com/

Here's a thread about this and other problems.

This alert has been fixed in the latest Raid controller firmware listed below. I also listed the other various fixes listed along with it.

Dell MD3000 Resource CD

http://support.dell.com/support/downloads/download.aspx?fileid=350383

Dell MD3000 SAS RAID Controller FW

http://support.dell.com/support/downloads/download.aspx?fileid=350727

- New OS support for Windows 2008 R2 Server, SLES 11, SLES 10 U3,
RHEL 4.8, RHEL 5.4.
- Modular Disk Storage Manager enhancements.
Additionally, the following issues have been fixed:
- Excessive Destination Driver Errors with no component listed on
2nd gen firmware
- BBU Learn Cycle fails in Simplex mode
- Learn Cycle failing as “incomplete”
- NX1950 Solution losing connectivity to every device on the network
- Hitachi SATA HDD firmware failing to update
- ESX host with CHAP enabled causes reboot loop when updating to
2nd gen firmware.
- MPP Virtual HBA Driver issue with Oracle ASM
- 2nd gen firmware upgrade utility does not display double byte
characters properly