This post is more than 5 years old
2 Posts
0
1268
October 9th, 2017 15:00
MD3000i Degraded Physical Disk Channel
Our MD3000i had errors saying one of the hard drives and control modules were bad. I replaced the hard drive and control module and it appears as though the hard drive rebuilt successfully because the lights are now green and it said it was rebuilding. Now it says the hard drive is optimal but gives the following errors:
1. Degraded Physical Disk Channel: 0
2. Degraded Physical Disk Channel: 0, 1
3. Individual Physical Disk - Degraded Path
These errors only appeared after I replaced the hard drive and control module.
Does anyone know how to resolve this?
No Events found!
jcyoung
2 Posts
1
October 16th, 2017 12:00
I found a post that recommended updating the iSCSI RAID Controller firmware and the Hard Disk Drive firmware. I tried that and it seemed to fix the problem.
DELL-Josh Cr
Moderator
•
9.4K Posts
0
October 10th, 2017 10:00
Hi,
Did the warning go away after the drive rebuilt?